Atomstack P7 M40 Portable Mini Laser Engraving Machine Cutter Wood Cutting New

  
New ATOMSTACK P7 M40 Portable Mini Laser Engraving Machine Cutter Wood Cutting Design 40W Desktop DIY Laser Engraver. Please take this with understanding and patience... Eye-protection flame-retardant filter panoramic glass: The flame-retardant filter panoramic glass can filter 97% of the ultraviolet light, which plays a very good role in protecting your eyes. You and the people around you do not need to wear goggles, you can also clearly Watch laser engraving. Reduce the cost of your goggles and the inconvenience of wearing goggles. The glass is flame retardant and safer to use.

Robust and easy-to-install structure design: The all-aluminum alloy anodized structure design makes the machine more durable and improves the accuracy of engraving. The portable all-metal structure, 85% pre-assembly, can be installed in 5 minutes.

Upgraded version of high-performance fixed-focus laser: Engraving can be done without adjusting the focal length; the newly upgraded compressed spot increases the energy concentration by 200%, and the spot size is only 0.02mm², which can take into account both precision engraving and high-energy cutting. At the same time, the laser power of fixed-focus laser is more stable than that of zoom laser. Wide compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc. Precise scale lines axis: There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement.

200200mm large area engraving interval can meet your various engraving needs. Newly upgraded ultra-fine compression laser: the laser adopts 4-fold lens group collimation and focus technology, the optical power is 4.55.5W, the laser focus area is reduced to 0.02mm², the high-density laser can easily cut 10mm thick wood boards and 6-8mm black acrylic; Can directly engrave mirror stainless steel metal and ceramics. Integral screw rod: The machine uses an integrated screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the movement of the laser more precise and the coupling more durable.

New laser with knob: It is more convenient and quick to adjust the height of the laser. The new laser is equipped with a horizontal gyroscope: it stops working immediately when it is tilted to ensure your safety 10. Colorful gift box packaging: more beautiful and more convenient to give gifts Product Parameters: Item model number: ATOMSTACK P7 M40 Print Size: Recommend Print Size 200200mm Engraving materials: wood, bamboo, cardboard, plastic, leather, MDF, slate, lacquered metal, mirror stainless steel; Cutting material: cardboard, non-woven fabric, veneer, acrylic, some thin plastic board, sponge, MDF, leather; Electric power output: 40W Laser power output: 4.5-5.5W Wave Length: 445 ± 5nm Engraving accuracy: 0.01mm Focusing method: fixed focus laser, no need to focus Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.

Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system. Input Format: NC, BMP, JPG, PNG, DXF, etc.

Data transmission method: USB connection. Input Voltage: AC100-240V, 50/60Hz Output Voltage: DC12V, 5A Certification: CE FCC RoHS FDA PSE Q&A Q: Does this machine need to be assembled when I received it? A: This machine comes as a kit.

You need to assemble it yourself. All tools and part are included in the kit. Q:hello, can we have a user manual to use this machine (Atomstack A5)?

What software to install and where to find it? A:you can find a user manual and a table with suggestions of settings for cutting and engraving in the official page of atomstack. A: The laser module have over 10000 hours lifetime. Q: Can I regulate the laser power or the laser power is adjustable? A: yes, can adjustable Q:what is the maximum thickness of acrylic it can cut?

A :The results we have tested so far: the thickest 12mm, black acrylic sheet, can be cut and penetrated Q:New ATOMSTACK P7 M40 40W Laser in the description informs 4.5-5.5W, wouldn't it be 40W? A :The total power of the machine is 40W, and the laser power is 5-5.5W Q:Can this be used to cut leather, if yes how many passes for each thickness?

A :Leather can be cut, and the thickness within 2mm can be cut and penetrated at one time. Q: When I receive it, how to let it work? A: Fist of all, you need to plug the stepper motor power cable to the controller board, then install the software and the driver, power supply the machine, that's all.

Note: - When operating the laser engraving machine, please install the laser protective cover. If it is not installed, you need to wear goggles. Please do not touch the laser emitter with your hand, or it may burn your hand. Please avoid strong impact on the machine. Children under 14 are not allowed to use this product and children over 14 need adult supervision. The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser. Atomstack p7 m40 portable mini laser engraving machine. Atomstack p7 m40 portable mini laser engraving machine price. Atomstack p7 m40 portable mini laser engraving machine for sale. Atomstack mini laser engraving machines. Atomstack mini laser engraving machine price. Atomstack mini laser engraving machine for sale. Atomstack mini laser engraving machine amazon.

Atomstack mini laser engraving machine accessories. Atomstack mini laser engraving machine aluminum. Atomstack mini laser engraving machine black. Atomstack mini laser engraving machine best price. Atomstack mini laser engraving machine brands.

Atomstack mini laser engraving machine cnc laser printer. Which takes around 30- 50 days to arrive.

30 days to return & replace an item if it is defective. The product came very well packaged. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "matanv29" and is located in this country: CN. This item can be shipped worldwide.

1. Model: Atomstack P7 M40
2. Machine Operation: Electric
3. Model Number: A5 Laser Engraving Machine
4. Origin: Cn(origin)
5. Maximum Print Size: 410*400mm
6. Maximum Working Speed: 1000mm/min
7. Printing Speed: 1000mm/min
8. Color Print Speed: 1000mm/min
9. Diameter Temp: --
10. Maximum Printing Speed: 1000mm/min
11. Interface Type: Usb
12. Bed Temp: --
13. Material: Wood
14. Engraving Application: Description
15. Language: English
16. Precision: 0.01
17. Molding Technology: Lnns
18. Application Material: Wood/plastic/paper/bamboo/leather/acrylic/fabric/stainless Steel
19. Type: Engraving Machine
20. Engraving Method: Laser
21. Slice Thickness: --
22. Operating System: Lasergrbl, Lightburn
23. Fliament: --
24. Name Tag Style: Description
25. Slice Software: --
26. Keyword: 3d Laser Cutter Printer
27. File Format: Nc, Bmp, Jpg, Png, Dxf, Etc.
28. Nozzle Diameter: --
29. Style: Protable Mini Desktop Laser Engraver
30. Warranty: 13 Months
31. Feature: Mini Home Use Engraving And Cut Machine
32. Power: 40W
33. Brand: Atomstack
34. Aplication: Laser Engraving/cutting/carving
35. Power Supply: 110-220v Input 12v Output
36. Ce Certification: Yes
37. Time: 2021 Newest Arrive
38. Shipping Fee: Free Shipping
39. Consumables Diameter: --
40. Certification: Ce
41. Auto Leveling: Yes
42. Voltage: 110-220v
43. Motherboard Axis: Y X