Wainlux Laser Engraver K6 3000mw CNC Bluetoot Mini Laser Engraving Machine DIY Logo Mark Printer Cutter Woodworking Wood Plastic. Brand: WAINLUX Model: K6 Material: ABS Control Model: PWM Operating System: WIN-7/8/10; IOS, Android Applicable Materials: Paper/Wood chips/Plastic/Stone/LeathWare/Cloth Interface specification: 3W Laser Wavelength: 450nm Working Area: 8080mm Total power: 17W Output Optical Power: 3W Graphic Format Supported: JPG/JPEG/BMP/TIF/GIF Image Size: 0.05mm Machine Supply Voltage: 12V 2A Control Line Installation Method: There is not need to install the machine. Best Focus Range: 30-50mm Best Focus Length: 100mm Safety Warning: There has warning signs, If the machine has moved or overturns, the laser will be turned off automatically.
Movement Protection: Using a sensitive 3-axis accelerometer for motion deception, it will notice an accidental movement during operating, and Wainlux will shut down immediately. Thanks to its innovative rail and baseless design, the Wainlux can engrave objects of any size so long as they are kept horizontally stable under the laser's XY axis. Engrave Your Design On Almost Any Object:Metal Spray Paint, Leather, Wood, Bamboo, Plastic, Paper. The product is a laser carving machine for home use, a tool machine, can not be compared with laser carving machine for industrial use.Do not use the laser head to point at human or livestock, do not use laser to point at people's eyes. Skin exposure to laser is strictly prohibited. The caving machine should not be stopped while working, it will cause a damage. This product not suitable for kids under age of 14.
Software can support Operating System: WIN-7/8/10; IOS, Android. Do not fall or make any collision to the product. Metal, glass, crystal and transparent or translucent stuff are can not be engraved. The color of the item may vary slightly due to photography and different PC monitor, and the size might be slightly errored due to manual measurement.Your kindly understanding would be appreciated. You might need to temporarily shut down the antiviruss software before downloading the software. Otherwise some files in the software would be mistaken for viruss and deleted by antiviruss software. Please according to the user manual to operate the machine. After 20 minutes of working, it need to take a break, can not work continuously for a long time. Laser engraver USB disk USB cable Power adapter Craft paper Black card Operating instructions 1 x Chinese / English manual (distribute the adapter according to your country).
The machine has no response after it is powered on. 1 Check whether the power plug of the machine is properly inserted into the socket.
2 Check whether the power socket is powered on and whether the switch is on. 3 Check whether the red power switch on the machine is on. The machine is not connected to the computer. 1 Check whether the USB cable properly connects the computer (the cable should be connected to the port at the back of the desktop computer) and Is the machine connected normally.2 Check whether the red power switch on the machine is on, whether the laser is slightly bright, etc. 3 Check whether the driver software has been installed on the computer. If there is an exception during the installation, shut down the computer and restart it, and then re-install the driver software.
4 Check whether the computer is normal. Scan and kill the virus, restart the computer and try again. 5 Pull out the USB cable and power plug, and plug them in again after 5 seconds. There is no response when the mobile APP is connected with the machine.
1 Check whether the red power switch on the machine is on, whether the laser is slightly bright, etc. 3 After the machine is powered on, it can only be connected effectively once.If the machine or mobile APP is shut down midway, the machine can only be connected again after the machine and mobile APP are restarted;To connect the machine with the mobile APP, the machine must be powered on and return to Standby Mode. Open the mobile APP to connect the machine. The machine can't engrave patterns. 1 Laser module not well focuséd: adjustlaser focusaccording to user manual. 2 Check if there is any debris in the light outlet of the laser head. If any, remove it before engraving. 3 Check engraving power and depth parameters, and they cannot be set too small. 1 Clean the light outlet of the laser head with alcohol to remove dust or sundries. 2 Increase the engraving depth until the desired engraving effect is achieved(the depth and power of engraving should be increased or decreased repeatedly depending on the desired effect). 3 Check whether the machine is placed flat. The machine must be placed on a level table when working. 4 The image imported must be clear and its color must not be too light, which will affect the engraving effect. Questions about one-key of line engraving. 1 Engraving stops midway:The image is not downloaded completely;re-download the image.
2 There are no patterns or patterns are unclear:The engraving power and depth parameters are not set correctly when the image is downloaded. 3 There are extra lines when the image is engraved:The computer may have a virus;kill the virus of the computer;restart the computer; re-download the image. If there is any problem with the product that cannot be uséd normally, please contact our customer service, provide photos and operating videos, detailed description of the product problem, and we have a professional team to solve the product problem for you.If the parcel is lost or damaged, please contact the Courier first to find or compensate for it. Please confirm that your address and zip code are correct. Service Transit Time is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
Sorry, our items are NOT available for pick-up. No additional information at this time. Estilo Glass Double Drink Dispensers for Parties - Set of 2-1 Gallon Glass Jar B.
FineDine Glass Drink Dispenser for Fridge - 1 Gallon Water, Laundry Detergent, J. Eleganttime 1 Gallon Glass Drink Dispensers for Parties, 2 Pack Beverage Dispense. [8 Pack] 16 OZ Glass Juicing Bottles w Airtight Lids & 2 Straws & 2 Lids w Hol.